Column Name | Data Type | Description |
controlling_server_id | NUMBER | Foreign key to apt_v_server for the media server that is the primary controller for this tape drive. Note: This field is not relevant for SSO environments |
device_name | STRING | Full pathname to the device that is controlling this tape drive |
drive_id | NUMBER | Foreign key to the Tape drive on which this job/tape media was mounted and written (See apt_v_nbu_su_group_member) |
drive_in_use | STRING | Y=Yes, N=No. |
drive_name | STRING | Name of the tape drive as reported by NetBackup |
drive_status_name | STRING | The overall status of the tape drive |
drive_type_name | STRING | The type of tape drive |
inquiry_string | STRING | SCSI inquiry string performed by NetBackup for this tape drive. |
library_id | NUMBER | Foreign key to apt_v_nbu_tape_library. This is the library that contains the tape drive. |
robot_drive_index | NUMBER | Index of this tape library within the library reference by the library_id field. |
serial_number | STRING | Serial number as obtained from the SCSI inquiry against the tape drive |
server_id | NUMBER | Foreign key to apt_v_server for the management server for this tape drive |
vendor_drive_status | STRING | This field contains the overall status of the tape drive. The following is an enumeration list of the possible values: P=Up and Online D=Down or Offline O=Up and online but in Operational Mode |
vendor_drive_type | NUMBER | This field contains the type of the tape drive. The following is a list of the possible enumeration values: 1=Qtr Inch 2=Half Inch 3=Half Inch-type 2 4=Half Inch-type 3 5=4MM 6=8MM 7=8MM type 2 8=8MM type 3 9=DLT 10=DLT type 2 11=DLT type 3 12=DTF 13=Optical Library 99=Other |